How To Install Door Trim Without Nail Gun

As the world is evolving so does the use of tools and equipment. Earlier in the days, we used to hit the nail with a hammer for a long time until it went properly inside the surface.

Now we don’t even need hammers as all of our work has gone electric and we use nail guns to screw nails into any type of surface. You can do this task without investing much time or effort.

How To Install Door Trim Without Nail Gun

What will you do if you need to do a simple task like trimming the door but you don’t have a nail gun! For this purpose you must know how to install door trim without nail gun.

Installing door trim even without a nail gun isn’t that difficult. You just need to follow the right steps to achieve that. In this blog, we’ll be suggesting the easiest way of installation.

Installing Door Trim Without Nail Gun

Trimming doors have become quite easy with the help of nail guns as it could save you a lot of time. Following are some basic steps that can get your door trimmed in no time:

Prepping Design & Measurements

Before you dive right into the procedure, you should start by taking a look at your interiors. Check out different types of trim molding and figure out the best for you. You’ll have to choose the one that will be matching the entire outlook of your home.

Prepping Design & Measurements

Next, you should take measurements of your door so that you can purchase the right trim molding.

Gather your Material

After prepping you should start getting all the materials needed to complete the project.

All you need is a measurement tape, 60 teeth blades, wood glue, drilling machine, hammer, nails, and some basic safety equipment.

Stain the trim

Finally, you can start the process by the most essential part of the process i.e straining the trim.

It is crucial to make sure that you’ve picked out the authentic stain for your trim. Just apply the stain and let it rest until it is completely dried.

Stain the trim

It is recommended not to proceed before the properly setting it to dry or else it can make a mess.

Cut the trim

After staining, it’s time to cut the trim. You can start by measuring the trim which you want to cut. Use your 60 teeth blade to cut at a tilted angle of 45°.

The tilted angle is needed for making your trim completely set around the brink of the door.

Glue the end

Once you have fitted the trim around the door, you should glue its ends to lay off the base. It is important to place the trim exactly around your door’s shape as only a minor mistake can ruin the entire interior of your house.

Glue the end

Most handymen lay the trim in its place properly and then start gluing it for fitting all the sides in a proper manner. Once you have managed to do this, you’ll be done for the day.

Set the trim

Lastly, it is all about setting the trim which can be done by drilling a hole just above.

You can use a drilling machine or just the old-school hammer for screwing all the nails within the trim. All these nails must be set up properly.

FAQs

As we have reached the end of this blog, you must be having some questions regarding installation. A few of them are answered below:

Is it possible to glue the trim to avoid nailing?

You won’t need to apply glue or drill a nail into the trim if you manage to install a baseboard above it. However, it is important to set it up exactly like the door’s shape.

Can liquid nails be used for door trim?

Yes, all you need is some strict adhesives for completely attaching the trim to the brink of the door. So, for this purpose, any substance having strong adhesion is welcome to apply.

Why do I need to wear safety equipment?

During this kind of task even if it’s at home, you can’t predict any mishap. There can be a possibility that you fall from stool where you’re standing to attach the trim or the door breaks on you.

Conclusion

After thorough analysis of this process, we have learnt that we don’t necessarily need advanced equipment and tools to get the work done. You can install the door trim quite easily while saving a considerable time without even needing a nail gun.

All you need is some basic knowledge about the handywork, right equipment, proper measurements, and only related steps to get the task done.

If you have followed the above suggested steps with proper care and used only the best substances like stain or glue then your door trim can last longer.

Leave a Reply

Your email address will not be published. Required fields are marked *